[Sep 24, 2022] HPE6-A75 Exam Brain Dumps - Study Notes and Theory
Pass HP HPE6-A75 Test Practice Test Questions Exam Dumps
NEW QUESTION 35
An administrator supports a cluster of four Aruba Mobility Controllers (MCs) with management addresses of 10.1.100.101, 10.1.100.102, 10.1.100.103, and 10.1.202.181. The administrator accesses an AP associated with this cluster, reboots it and accesses apboot mode. The administrator executes the printenv command. Which AP parameter contains the IP addresses of the cluster members that the AP should use to connect to the cluster?
- A. Cfg_lms
- B. Master_ip
- C. Servername
- D. Noodelist
Answer: D
NEW QUESTION 36
An administrator deploys Aruba Mobility Controller 7005s to a company's branch offices. The administrator wants to disable the console port to prevent unauthorized access to the controllers.
Which controller command should the administrator use to implement this policy?
- A. mgmt-user console-block
- B. no mgmt-user console
- C. no console enable
- D. console disable
Answer: A
NEW QUESTION 37
What is true about clustering and AP connections to cluster members?
- A. The default thresholds are 75% for the Rebalanced Threshold and 25% for the Unbalanced Threshold.
- B. The AP will always stay connected to the LMS IP address configured in the AP profile.
- C. AP load balancing is disabled by default.
- D. During rebalancing, the active load is redistributed first.
Answer: C
NEW QUESTION 38
Refer to the exhibit.
An employee connects a corporate laptop to the network and authenticates for the first time using EAP-TLS. Based on the Enforcement Policy configuration shown, which Enforcement Profile wilt be sent?
- A. Deny Access Profile
- B. Onboard Device Repository
- C. Onboard Post-Provisioning - Aruba
- D. Onboard Pre-Provisioning - Aruba
Answer: D
NEW QUESTION 39
Which protocol do Mobility Controllers (MCs) use to detect a failed Mobility Master (MM)?
- A. SNMP
- B. VRRP
- C. IPSec
- D. PAPI
Answer: A
NEW QUESTION 40
A company has AOS-Switches, Aruba ClearPass, and Aruba Airwave. A network administrator needs to set up a new switch with the same settings found on other switches in the company. Which action rs likely to be the most useful to perform the task?
- A. Use the configuration audit tool on AirWave.
- B. View usage patterns on the switches on AirWave.
- C. Access the Network Device view on ClearPass.
- D. View the current running config on each switch.
Answer: C
NEW QUESTION 41
An administrator mistakenly configures the wrong VLAN setting on a managed controller's interface. This causes the controller to lose management access to the Mobility Master (MM).
Which mechanism will then attempt to restore the previous working configuration on the managed controller?
- A. auto-rollback
- B. disaster recovery
- C. bulk configuration
- D. restore config
Answer: A
NEW QUESTION 42
Refer to the exhibit.
An AD user's department attribute is configured as *HR". The user connects on Monday using their Windows Laptop to a switch that belongs to the Device Group HQ. Which role is assigned to the user in ClearPass?
- A. Remote Employee
- B. Vendor
- C. iOS Device
- D. Executive
- E. HR Local
Answer: A,E
NEW QUESTION 43
An administrator implements a standalone controller that runs ArubaOS 8.x. Which feature should the administrator configure to optimize the RF operation for the company's WLAN?
- A. ARM
- B. Clustering
- C. AirMatch
- D. Zones
Answer: C
NEW QUESTION 44
Refer to the exhibit.
A company has attempted to implement OSPF without success. The devices in Area I need to be able to reach Area 2. Routes should be aggregated for advertisement in other areas. What must be changed to meet these requirements?
- A. Add the 10.2.0.0/16 range on Swttch-1 and the 10.1.0.0/16 range on Switch-2.
- B. Move the 10.1.0.0/16 range to Area 2 on Switch-1 and the 10.2.0.0/16rangetoArea 1 onSwitch-2.
- C. Change Area 3 to Area 0; remove Area 1 from Switch-2 and Area 2 from Switch-1.
- D. Add Area 1 and Area 2 on VIAN 100 on both Switch-1 and Switch-2. Remove Area 3.
Answer: C
NEW QUESTION 45
An administrator wants to use Airwave to manually add devices on the network. Where should the administrator perform this action?
- A. in AMP Setup
- B. in Devices
- C. in Groups
- D. in Device Setup
Answer: D
NEW QUESTION 46
What is the purpose of the captive portal URL hash key on an AOS-Switch?
- A. It specifies the captive portal URL and conceals the setting in the config.
- B. It encrypts and secures the RADIUS messages that the AOS-Switch sends to ClearPass.
- C. It authenticates guest users based on the password the users enter hi the portal.
- D. It does not let users alter the URL that redirects them to the portal.
Answer: D
NEW QUESTION 47
Refer to the exhibit.
Controllers are configured m a cluster as shown in the exhibit. These are the network details.
* A Mobility Master (MM) manages the cluster.
* The cluster contains two controllers: C l and C2.
* API and AP2 use CI as their Active AP Anchor Controller (A-AAC). with C2 as their Standby AAC (S-AAC).
* AP3 and AP4 use C2 as their A-AAC, with CI as their S-AAC.
User1 establishes a wireless connection via API, where the Active User Anchor Controller (A-UAC) assigned is CI. with C2 as the standby. What happens when User I roams the wireless network and eventually their session is handled by AP3?
- A. The AP3's A-AAC switches to C1, and the user's A-UAC remains on C1.
- B. The AP3's A-AAC switches to C2, and the user's A-UAC remains on C1.
- C. The AP3's A-AAC switches to C2, and the user's A-UAC remains on C2.
- D. The AP3's A-AAC switches to C1, and the user's A-UAC remains on C2.
Answer: C
NEW QUESTION 48
Which statement is true about the databases in ClearPass?
- A. A Static host list can only contain a list of IP addresses.
- B. The endpoints database can only be populated by manually adding MAC addresses to the table.
- C. Entries in the guest user database do not expire.
- D. Entries in the local user database cannot be modified.
- E. Entries in the guest user database can be deleted.
Answer: C
NEW QUESTION 49
Which ArubaOS CLl command can an administrator execute to determine if AP load balancing is enabled in a cluster?
- A. show aaa cluster essid
- B. show lc-cluster group-membership
- C. show ap active
- D. show switches
Answer: B
NEW QUESTION 50
A customer wants to implement Virtual IP redundancy, such that in case of a ClearPass server outage, 802.1x authentications will not be interrupted. The administrator has enabled a single Virtual IP address on two ClearPass servers.
Which statements accurately describe next steps? (Select two.)
- A. A new Virtual IP address should be created for each NAD.
- B. The NAD should be configured with the primary node IP address for RADIUS authentication on the 802.1x network.
- C. The NAD should be configured with the Virtual IP address for RADIUS authentications on the 802.1x network.
- D. The primary node will respond to authentication requests sent to the Virtual IP address when the primary node is active.
- E. Both the primary and secondary nodes will respond to authentication requests sent to the Virtual IP address when the primary node is active.
Answer: C,D
NEW QUESTION 51
What are Operator Profiles used for?
- A. to enforce role based access control for Aruba Controllers
- B. to enforce role based access control for ClearPass Guest Admin users
- C. to enforce role based access control for ClearPass Policy Manager admin users
- D. to map AD attributes to admin privilege levels in ClearPass Guest
- E. to assign ClearPass roles to guest users
Answer: B
NEW QUESTION 52
Refer to the exhibit.
An Enforcement Profile has been created in the Policy Manager as shown. Which action will ClearPass take based on this Enforcement Profile?
- A. ClearPass will send the Session-Timeout attribute in the RADIUS Access-Request packet to the NAD and the NAD will end the user's session after 600 seconds.
- B. ClearPass will send the Session-Timeout attribute in the RADIUS Access-Accept packet to the User and the user's session will be terminated after 600 seconds.
- C. ClearPass will send the Session-Timeout attribute in the RADIUS Access-Accept packet to the NAD and the NAD will end the user's session after 600 seconds.
- D. ClearPass will count down 600 seconds and send a RADIUS CoA message to the user to end the user's session after this time is up.
- E. ClearPass will count down 600 seconds and send a RADIUS CoA message to the NAD to end the user's session after this time is up.
Answer: C
NEW QUESTION 53
......
Verified HPE6-A75 dumps Q&As - HPE6-A75 dumps with Correct Answers: https://www.fast2test.com/HPE6-A75-premium-file.html
The Best HPE ACEP Study Guide for the HPE6-A75 Exam: https://drive.google.com/open?id=1QEpe_l8bBiRphEVJrnj015g62V2gnitA