Get Ready to Pass the HPE6-A75 exam with HP Latest Practice Exam [Q27-Q42]

Get Ready to Pass the HPE6-A75 exam with HP Latest Practice Exam

Get Prepared for Your HPE6-A75 Exam With Actual HP Study Guide!

NEW QUESTION # 27
A network administrator can set the OSPF metric-type on an AOS-Switch to Type 1 or Type 2. What is the difference?

A. A Type 2 metric stays the same as the external route is advertised, while a Type 1 metric increments with internal OSPF link costs.
B. A Type 2 metric is assigned to multiple external routes that are aggregated together, while a Type 1 metric does not permit external route aggregation.
C. A Type 2 metric assigns cost 1 to a 100 Gbps link, while a Type 1 metric assigns cost 1 to all links of 100 Mbps or higher.
D. A Type 2 metric marks external routes that can be advertised in NSSAs, while a Type 1 metric marks external routes that can only be advertised in normal areas.

Answer: A

NEW QUESTION # 28
Refer to the exhibits.

The network administrator enters the commands shown in Exhibit 2. What is the spanning tree status on Al and A2?

A. A1 blocks traffic, and A2 forwards traffic.
B. A1 towards traffic, and A2 blocks traffic.
C. Both Al and A2 block traffic.
D. Both A1 and A2 forward traffic

Answer: D

NEW QUESTION # 29
Refer to the exhibit.

Based on the configuration of me create_user form shown, which statement accurately describes the status?

A. The visitor_company field will be visible to operators creating the account.
B. The visitor_company field will be visible to the guest users when they access the web login page.
C. The visitor_phone field will be visible to operators creating the account.
D. The email field will be visible to guest users when they access the web login page.
E. The visitor_phone field will be visible to the guest users in the web login page.

Answer: D

NEW QUESTION # 30
Refer to the exhibit.

Based on the configuration for the client's certificate private key as shown, which statements accurately describe the settings? (Select two.)

A. The private key is stored in the ClearPass server.
B. The private key for TLS client certificates is not created.
C. More bits in the private key will reduce security.
D. The private key is stored in the user device.
E. More bits in the private key will increase security.

Answer: D,E

NEW QUESTION # 31
A university wants to deploy ClearPass with the Guest module. They have two types of users that need to use web login authentication. The first type of users are students whose accounts are in an Active Directory server. The second type of users are friends of students who need to self-register to access the network.
How should the service be setup in the Policy Manager for this Network?

A. Active Directory server as the authentication source, and Guest User Repository as the authorization source
B. Either the Guest User Repository or Active Directory server should be the single authentication source
C. Guest User Repository and Active Directory server both as authentication sources
D. Guest User Repository as the authentication source and the Active Directory server as the authorization source
E. Guest User Repository as the authentication source, and Guest User Repository and Active Directory server as authorization sources

Answer: C

NEW QUESTION # 32
Refer to the exhibit.

A company has attempted to implement OSPF without success. The devices in Area I need to be able to reach Area 2. Routes should be aggregated for advertisement in other areas. What must be changed to meet these requirements?

A. Add the 10.2.0.0/16 range on Swttch-1 and the 10.1.0.0/16 range on Switch-2.
B. Add Area 1 and Area 2 on VIAN 100 on both Switch-1 and Switch-2. Remove Area 3.
C. Move the 10.1.0.0/16 range to Area 2 on Switch-1 and the 10.2.0.0/16rangetoArea 1 onSwitch-2.
D. Change Area 3 to Area 0; remove Area 1 from Switch-2 and Area 2 from Switch-1.

Answer: D

NEW QUESTION # 33
Refer to the exhibit.

A network administrator sets up 802.1X authentication to a RADIUS server on an AOS-Switch.
The RADIUS server and user devices are both set up to use REAP MSCHAPv2. The administrator tests the authentication and sees the output shown in the exhibit.
Which issue could cause this output?

A. The switch does not have a certificate tor port-access installed on the switch.
B. The switch port is set for user mode 801. IX. but the RADIUS server is set for port mode.
C. The RADIUS shared secret does not match on the switch and the server.
D. The administrator entered the wrong password for the test account.

Answer: C

NEW QUESTION # 34
Refer to the exhibit.

A known unicast packet is received from Switch-1 on the standby and must be forwarded to Switch-2. How does the VSF fabric decide which port in the aggregated (ink should forward the packet?

A. The standby uses its own port in the link aggregation to forward the fabric.
B. The standby selects the port on the designated forwarder for the aggregation.
C. The standby uses the typical load sharing algorithm, and it might select either its port or the commander's port.
D. The standby sends the packet to the commander over a VSF link, and the commander decides the correct port.

Answer: A

NEW QUESTION # 35
An administrator needs to authenticate users connected to an ArubaOS Switch where the switch authenticates the user, assigns the firewall policies to the user, and processes some of the users' traffic. Which connection method should the administrator configure on the ArubaOS-Switch?

A. Per-port tunneled node
B. VLAN tunneled mode
C. Per-user tunneled node
D. Split-tunneled mode

Answer: A

NEW QUESTION # 36
Refer to the exhibit.

An Enforcement Profile has been created in the Policy Manager as shown. Which action will ClearPass take based on this Enforcement Profile?

A. ClearPass will send the Session-Timeout attribute in the RADIUS Access-Request packet to the NAD and the NAD will end the user's session after 600 seconds.
B. ClearPass will count down 600 seconds and send a RADIUS CoA message to the NAD to end the user's session after this time is up.
C. ClearPass will count down 600 seconds and send a RADIUS CoA message to the user to end the user's session after this time is up.
D. ClearPass will send the Session-Timeout attribute in the RADIUS Access-Accept packet to the NAD and the NAD will end the user's session after 600 seconds.
E. ClearPass will send the Session-Timeout attribute in the RADIUS Access-Accept packet to the User and the user's session will be terminated after 600 seconds.

Answer: D

NEW QUESTION # 37
Refer to the exhibit.

An administrator implements AP licensing on a Mobility Master (MM).
- Each campus is responsible to purchase its own AP licenses.
- There are 900 AP licenses deployed in the global pool.
- There are three dedicated pools.
- From the global pool, 300 AP licenses are assigned to each dedicated
pool.
Network engineers at CampusA want to deploy an additional 100 APs. Currently all of the AP licenses in CampusA and CampusB are allocated, but only 200 of the AP licenses in CampusC are allocated.
What can the administrator do to add capacity for CampusA in alignment with campus policies?

A. Move 100 licenses from the CampusC pool to the global pool.
B. Add 100 more AP licenses to the global pool.
C. Add 100 more AP licenses and assign them to the CampusA pool.
D. Allow CampusA to share from the CampusC pool.

Answer: C

Explanation:
Each campus is responsive to purchase its own AP licenses.
You could not take licenses from CampusC.

NEW QUESTION # 38
An administrator mistakenly configures the wrong VLAN setting on a managed controller's interface. This causes the controller to lose management access to the Mobility Master (MM).
Which mechanism will then attempt to restore the previous working configuration on the managed controller?

A. bulk configuration
B. disaster recovery
C. restore config
D. auto-rollback

Answer: D

NEW QUESTION # 39
An administrator wants to use Airwave to manually add devices on the network. Where should the administrator perform this action?

A. in Devices
B. in Groups
C. in Device Setup
D. in AMP Setup

Answer: C

NEW QUESTION # 40
What is true about clustering and AP connections to cluster members?

A. AP load balancing is disabled by default.
B. The default thresholds are 75% for the Rebalanced Threshold and 25% for the Unbalanced Threshold.
C. The AP will always stay connected to the LMS IP address configured in the AP profile.
D. During rebalancing, the active load is redistributed first.

Answer: A

NEW QUESTION # 41
Refer to the exhibit.

An employee connects a corporate laptop to the network and authenticates for the first time using EAP-TLS. Based on the Enforcement Policy configuration shown, which Enforcement Profile wilt be sent?