VMware 3V0-21.21 Premium Exam Engine pdf - Download Free Updated 90 Questions [Q32-Q48]

Share

VMware 3V0-21.21 Premium Exam Engine pdf - Download Free Updated 90 Questions

Verified 3V0-21.21 Bundle Real Exam Dumps PDF

NEW QUESTION 32
Which two of the listed requirements would be classified as performance non-functional requirements? (Choose two.)

  • A. The vSphere platform must be able to provide a minimum throughput of 400 MB/s
  • B. The vSphere platform must be able to provide a maximum read latency of 15 ms
  • C. The vSphere platform must be able to provide a recovery time objective of 30 minutes
  • D. The vSphere platform must be able to provide a service-level agreement (SLA) of 99,9%
  • E. The vSphere platform must be able to provide N+1 redundancy

Answer: A,B

 

NEW QUESTION 33
Which two statements are true about gathering functional business and application requirements? (Choose two.)

  • A. It might require multiple rounds of stakeholder interviews
  • B. It is a non-iterative process
  • C. It focuses on functional requirements with C-level stakeholders
  • D. It builds stakeholder consensus
  • E. It leverages a single set of Question:s for all stakeholders

Answer: A,C

 

NEW QUESTION 34
An architect is designing a new greenfield environment with 600 ESXi hosts in an automated fashion. The engineering department already has a PXE Boot server, TFTP server, and DHCP server set up with an NFS mount for their current Linux servers.
The architect must be able to demonstrate and meet a security requirement to have all infrastructure processes separated.
Which recommendation should the architect make for the ESXi host deployment?

  • A. Deploy each ESXi host individually and document it to satisfy security requirements
  • B. Ask the business to expand the engineering environment to service the virtual environment as well
  • C. Request an isolated network segment to use and dedicate it to Auto Deploy functions
  • D. Request a common shared network with flexible security measures to accommodate different auto deployment options

Answer: C

Explanation:
Reference:
https://docs.vmware.com/en/VMware-vSphere/7.0/com.vmware.esxi.install.doc/GUID-8DAC6FEE-0441-4072-8195-9461095C2041.html

 

NEW QUESTION 35
Refer to the exhibit.
During a requirements gathering workshop, the architect shares the following diagram:

What should the architect recommend for guaranteed throughput for each service?

  • A. Use the Route Based on IP Hash for ESXi management and VM network Use the Route Based on IP Hash for backup network Use the Route Based on the Originating Virtual Port for vMotion Use failover with pNIC3 as Active for replication
  • B. Use explicit failover order with pNIC0 as Active for ESXi Management and VM Network Use explicit failover order with pNIC1 as Active for backup network Use explicit failover order with pNIC2 as Active for vMotion Use explicit failover order with pNIC3 as Active for replication
  • C. Use the Route Based on IP Hash for ESXi management and VM network Use failover with pNIC1 as Active for backup network Create a link aggregation group (LAG) for vDS_02
  • D. Create a link aggregation group (LAG) for vDS_01
    Use the Route Based on Physical NIC Load for vMotion Use the Route Based on Physical NIC Load for replication

Answer: B

 

NEW QUESTION 36
During a requirements gathering workshop, the customer provides the following requirement (REQ) and constraints (CON):
REQ01: The customer is looking for a way to limit database virtual machine (VM) placement to save on CPU licensing costs.
CON01: There is a single cluster with no budget to scale.
CON02: All virtual machines must run on the consolidated cluster.
Which two design decisions should the architect make to meet the customer requirement? (Choose two.)

  • A. The solution must use a vRealize Orchestrator workflow for VM placement
  • B. The solution must use vSphere VM and host DRS groups
  • C. The solution must use VM-Host affinity rules
  • D. The solution must use VM-VM anti-affinity rules
  • E. The solution must use vSphere DRS in manual mode

Answer: B,C

 

NEW QUESTION 37
During a transformation project kick-off meeting, an architect highlights specific areas on which to focus while developing the new conceptual design.
Which two of the listed statements are business requirements? (Choose two.)

  • A. There must not be a single point of failure for the virtual infrastructure
  • B. Sites must support a network latency of less than 12 ms round-trip time (RTT)
  • C. The project should use the existing storage devices within the data center
  • D. There is no budget specifically assigned for disaster recovery
  • E. The solution must allow data replication between sites

Answer: B,E

 

NEW QUESTION 38
An architect is considering placement of virtual machines within an existing VMware software-defined data center (SDDC).
During the discovery phase, the following information is documented:

Which two recommendations should the architect make for placement of the virtual machines to meet resource profile requirements? (Choose two.)

  • A. All virtual machines matching Virtual Machine Resource Profile 2 should be placed on Cluster One.
  • B. All virtual machines matching Virtual Machine Resource Profile 2 should be placed on Cluster Three.
  • C. All virtual machines matching Virtual Machine Resource Profile 1 should be placed on Cluster Two.
  • D. All virtual machines matching Virtual Machine Resource Profile 2 should be placed on Cluster Two.
  • E. All virtual machines matching Virtual Machine Resource Profile 1 should be placed on Cluster One.

Answer: C,E

 

NEW QUESTION 39
Which two of the listed requirements would be classified as performance non-functional requirements? (Choose two.)

  • A. The vSphere platform must be able to provide a maximum read latency of 15 ms
  • B. The vSphere platform must be able to provide a recovery time objective of 30 minutes
  • C. The vSphere platform must be able to provide a minimum throughput of 400 MB/s
  • D. The vSphere platform must be able to provide a service-level agreement (SLA) of 99,9%
  • E. The vSphere platform must be able to provide N+1 redundancy

Answer: A,B

 

NEW QUESTION 40
The Chief Operating Officer (COO) at an organization raises concerns that their virtual infrastructure environment is vulnerable. Recently, a security-related issue with a virtual machine caused all management services to become unavailable. No budget is available in the short term for additional platform investment. An architect is asked to review the current environment and make recommendations to mitigate concerns.
A virtualization administrator has provided the following details:
There is a single four node cluster of ESXi servers
There are two, Layer 2, physical network switches connecting resources
The data center network is presented as a single /16 subnet
Given the information provided, which functional requirement should the architect include in the design to mitigate the COOs concerns?

  • A. The virtual infrastructure environment must connect application virtual machines and management services to new physical network switches
  • B. The virtual infrastructure environment must connect management services to a vSphere standard switch (VSS)
  • C. The virtual infrastructure environment must connect application virtual machines and management services to separate distributed virtual switches (DVS)
  • D. The virtual infrastructure environment must connect application virtual machines and management services to separate VLANs

Answer: B

 

NEW QUESTION 41
An architect makes the design decision to install ESXi on embedded and resilient 8 GB SD cards.
What is the impact of this design decision?

  • A. The size of the SD cards is too small and the installation will fail
  • B. The vSphere Auto Deploy feature must be enabled on vCenter Server
  • C. Host profiles must be used for this kind of installation
  • D. Scratch partition would need to be created on the external storage

Answer: C

 

NEW QUESTION 42
An architect decides to separate virtual desktops and application servers into separate vSphere clusters to meet security and management requirements.
What are two implications of this design decision? (Choose two.)

  • A. There will be an increase in management overhead.
  • B. Identical hardware must be procured for all hosts.
  • C. There will be a reduction in performance.
  • D. There will be additional licensing and cost requirements for both clusters.
  • E. The patching cycles will affect both clusters at the same time.

Answer: D,E

 

NEW QUESTION 43
An architect is designing storage for a new vSphere environment to meet the following requirements:
Asynchronous replication is required between two sites.
The impact on the storage layer should not impact the performance of the compute layer.
Each application tier will require different replication attributes.
Virtual machine live migration across compute and storage must be supported.
Virtual machine aware back up will be leveraged.
Operational management overhead should be minimized.
Operational automation should be supported.
Which storage design recommendations would meet the requirements?

  • A. Two new vSphere clusters enabled with vSAN will be deployed, one at either site. vSAN will be used to provide policy-based management for each application tier.
    vSphere Replication will be used to replicate the virtual machine data in an asynchronous configuration.
  • B. Two new ISCSI storage arrays will be deployed, one at either site.
    Each application tier will be initially provisioned a new LUN. Data replication will be offloaded to the new arrays.
  • C. Two new storage arrays will be deployed, one at either site.
    vSphere Volumes (vVOLs) will be used to provide policy-based management for each application tier. Data replication will be offloaded to the new arrays.
  • D. Two new Fibre Channel storage arrays will be deployed, one at either site.
    Each application tier will be initially provisioned a new LUN. Data replication will be offloaded to the new arrays.

Answer: A

 

NEW QUESTION 44
An architect is designing a new greenfield environment that will install ESXi on local disks. There is a requirement to streamline initial and future installations of ESXi hosts.
Which configuration option should the architect recommend for installing ESXi hosts to meet these requirements?

  • A. Auto Deploy with stateful install mode
  • B. Auto Deploy with stateless caching mode
  • C. Installation with kick start script
  • D. Manual installation using boot from SAN

Answer: A

 

NEW QUESTION 45
During a requirements gathering workshop, the customer's Chief Information Security Office (CISO) provides the following requirements that are pertinent to the design of a new vSphere environment:
* All operating system critical patches must be installed within 24 hours of release.
* All virtual machine templates must be updated every three months in line with company policy.
Which requirement classification is being gathered for the design documentation?

  • A. Manageability
  • B. Security
  • C. Availability
  • D. Recoverability

Answer: A

Explanation:
Explanation

 

NEW QUESTION 46
What is a benefit of using a scale-out method for handling vSphere cluster growth?

  • A. Faster to reach the limit of virtual machines per host
  • B. Less potential impact to virtual machines during a single host failure
  • C. An overall reduction in the license costs for the cluster
  • D. An increase in the recovery time objective (RTO) for the cluster

Answer: A

 

NEW QUESTION 47
An architect is designing a new VMware software-defined data center (SDDC) that will consist of 100 branch sites connected to a single VMware vCenter Server within the primary data center. To allow for the use of existing automation scripts, there is a requirement to replicate the names of the virtual distributed port groups across all sites. The procurement team purchases licensing and there is no further budget allocated.
Which design decision should the architect make to meet this requirement?

  • A. A new virtual data center will be created for each branch site
  • B. The automation script will be updated to reflect unique naming for each site
  • C. A new vCenter Server will be deployed for each branch site
  • D. A new host and cluster folder will be created for each branch site

Answer: D

 

NEW QUESTION 48
......


VMware 3V0-21.21 Exam Syllabus Topics:

TopicDetails
Topic 1
  • Determine compliance requirements for a vSphere design
  • Determine appropriate datastore configurations based on requirements
Topic 2
  • Determine switch type (standard vs distributed) based on requirements
  • Determine disaster recovery requirements for a vSphere design
Topic 3
  • Determine business continuity requirements for a vSphere design
  • Differentiate between functional and non-functional requirements
Topic 4
  • Determine physical and virtual networking topology
  • Determine storage multi-pathing and load balancing method
Topic 5
  • Determine different storage segregation techniques based on a given scenario
  • Determine availability requirements for vCenter Server
Topic 6
  • Identify and address scalability requirements
  • Determine the appropriate host size based on requirements
Topic 7
  • Determine appropriate storage policy based on requirements
  • Differentiate between workload or management clusters
Topic 8
  • Determine risks, constraints and assumptions for a design
  • Determine the physical storage design based on requirements
Topic 9
  • Determine the correct sizing for vCenter Server based on workload requirements
  • Determine security requirements for a vSphere design
Topic 10
  • Determine the appropriate cluster size based on requirements
  • Determine data protection requirements for a vSphere design

 

Pass Your VMware Exam with 3V0-21.21 Exam Dumps: https://www.fast2test.com/3V0-21.21-premium-file.html

3V0-21.21 Dumps PDF New [2022] Ultimate Study Guide: https://drive.google.com/open?id=1HW-Bn9F70FXRXqTeTDosgGwVpTMPEFcZ 

Contact Us

If you have any question please leave me your email address, we will reply and send email to you in 12 hours.

Our Working Time: ( GMT 0:00-15:00 ) From Monday to Saturday

Support: Contact now 

日本語 Deutsch 繁体中文 한국어