[Jul-2024] Use Real 3V0-21.21 Dumps - 100% Free 3V0-21.21 Exam Dumps
3V0-21.21 PDF Dumps Exam Questions – Valid 3V0-21.21 Dumps
VMware 3V0-21.21 exam is intended for experienced VMware professionals who have a deep understanding of vSphere 7.x, including its architecture, components, and features. 3V0-21.21 exam covers a wide range of topics, including vSphere 7.x design principles, high availability and disaster recovery, storage design, networking design, and virtual machine design. Candidates must have a solid grasp of these topics to pass the exam and earn the certification.
NEW QUESTION # 33
An architect is designing a new greenfield environment that will install ESXi on local disks. There is a requirement to streamline initial and future installations of ESXi hosts.
Which configuration option should the architect recommend for installing ESXi hosts to meet these requirements?
- A. Manual installation using boot from SAN
- B. Auto Deploy with stateful install mode
- C. Auto Deploy with stateless caching mode
- D. Installation with kick start script
Answer: B
Explanation:
Stateful Install: When a host is booted for the first time, the host profile configuration states Auto Deploy is to install ESXi on local host storage. All consecutive host boots, only the local storage is used until the image profile configuration is changed. Stateless: Auto Deploy is used to install ESXi in memory on the target host. The state information of the ESXi host is managed by Auto Deploy. No local storage is required.
NEW QUESTION # 34
Which of the listed requirements would be classified as a recoverability non-functional requirement?
- A. Maintenance windows must be scheduled to take place monthly during an established overnight period.
- B. The platform must be available 24 hours a day, 7 days a week with the exception of scheduled downtime.
- C. The platform must be integrated with existing change control policies.
- D. The platform must be able to support a maximum tolerable downtime (MTD) of 30 minutes.
Answer: C
NEW QUESTION # 35
Refer to the exhibit.
During a requirements gathering workshop, the customer shares the following about their existing ESXi host virtual networking infrastructure:
The customer confirms that:
Each ESXi host has approximately 200 virtual machines.
They want to maximize the number of concurrent virtual machine migrations.
When placing a host in maintenance mode, it takes a long time to evacuate the virtual machines.
Which two recommendations should the architect make in order to help the customer overcome their challenge? (Choose two.)
- A. Configure the network to use MTU for the VMotion VMKernel to 1,600 bytes
- B. Create an additional standard switch with pNIC3 to use for vMotion
- C. Use 10 GbE NICs instead of 1 GbE
- D. Configure the network to use MTU for the VMotion VMKernel to 9,000 bytes
- E. Use the 3 pNICs and bundle them in a link aggregation group (LAG) configuration
Answer: B,D
Explanation:
https://docs.vmware.com/en/VMware-vSphere/7.0/com.vmware.vsphere.vcenterhost.doc/GUID-7DAD15D4-7F41-4913-9F16-567289E22977.html
NEW QUESTION # 36
An architect is tasked with designing a greenfield VMware software-defined data center (SDDC) solution that will be used to deliver a private cloud service for a customer.
During the initial meeting with the service owner and business sponsor, the customer has provided the following information to help inform the design:
* The solution must initially support the concurrent running of 300 production and 600 development virtual machines.
* The production environment should be delivered across two geographically dispersed data centers.
* The development environment must be vSphere-based but does not have to be deployed on-premises.
* The two data centers are connected to each other through multiple diversely routed, high bandwidth and low latency links.
* The customer's server hardware standard document states that all virtual infrastructure hosts must be based on blade architecture only.
* The service owner has said that is important to ensure that neither the availability target of 99.5% nor the resource capacity is affected when the operations team completes maintenance activities, such as the monthly software patching and ad-hoc hardware break/fix.
* All virtual machine backups must be completed using the existing backup service.
* The recovery time objective (RTO) for the service is four hours.
* The recovery point objective (RPO) of the service is 24 hours.
Given the information from the customer, which two would be classified as assumptions within the design?
(Choose two.)
- A. The clusters will have a minimum redundancy of N+1
- B. All virtual machines will be deployed with the same resource profile for production and development
- C. The backup service will store data in a secure facility
- D. The backup service has sufficient capacity for the new requirements
- E. The customer will update their hardware standard to support rack mount servers
Answer: C,E
NEW QUESTION # 37
Refer to the exhibit.
During a requirements gathering workshop, the customer shares the following about their existing ESXi host virtual networking infrastructure:
The customer confirms that:
Each ESXi host has approximately 200 virtual machines.
They want to maximize the number of concurrent virtual machine migrations.
When placing a host in maintenance mode, it takes a long time to evacuate the virtual machines.
Which two recommendations should the architect make in order to help the customer overcome their challenge? (Choose two.)
- A. Use 10 GbE NICs instead of 1 GbE
- B. Configure the network to use MTU for the VMotion VMKernel to 9,000 bytes
- C. Configure the network to use MTU for the VMotion VMKernel to 1,600 bytes
- D. Create an additional standard switch with pNIC3 to use for vMotion
- E. Use the 3 pNICs and bundle them in a link aggregation group (LAG) configuration
Answer: A,D
NEW QUESTION # 38
An architect is tasked with designing a new VMware software-defined data center (SDDC) solution for an online retail customer who has a primary and secondary data center as well as 10 distribution hubs.
The customer has provided the following business requirements to help inform the design:
The solution must support the running of up to 1,000 concurrent virtual machines across the primary and secondary data center.
The solution must support the running of up to 20 concurrent virtual machines in each distribution hub.
The solution must support the separation of management and lines-of-business application virtual machines.
All management components (including directory services, backup, automation, operations and logging) must be deployed to the primary data center.
All virtual infrastructure components must have redundancy of N+1.
All sites are connected to each other using a wide area network that has multiple diversely routed links.
The solution should support a monthly uptime target of 99.9%.
The recovery time objective (RTO) for the solution must be four hours.
The recovery point objective (RPO) for the solution must be 24 hours.
Given the information from the customer, which assumption should the architect include in the design?
- A. The wide area network has sufficient bandwidth to support centralized management.
- B. All business application virtual machines can be deployed into a single cluster within the primary data center.
- C. Each distribution hub should be configured with a backup device.
- D. Each cluster will have a minimum of four hosts.
Answer: C
NEW QUESTION # 39
Which two statements are true about gathering functional business and application requirements? (Choose two.)
- A. It focuses on functional requirements with C-level stakeholders
- B. It might require multiple rounds of stakeholder interviews
- C. It builds stakeholder consensus
- D. It is a non-iterative process
- E. It leverages a single set of
Answer: B,C
Explanation:
You interview stakeholders and conduct workshops to gather requirements and build consensus. Gathering requirements is an iterative process, which might require multiple rounds of interviews. Asking the right questions is vital, and you must gather both functional and nonfunctional requirements. A good strategy for a successful project is to bring the correct people together and build consensus.
NEW QUESTION # 40
A customer requests a review of its current vSphere platform design.
The following information is noted:
There are three different workload profiles for the virtual machines:
Tier-1 virtual machines operate resource-intensive applications and require dedicated allocations for CPU and RAM.
Tier-2 virtual machines operate internet-facing applications and require access to externally facing networks.
Tier-3 virtual machines operate platform management tools such as vCenter Server and have different lifecycle management requirements.
Tier-1, Tier-2 and Tier-3 virtual machines are all hosted on a single large vSphere cluster.
The Chief Information Security Officer (CISO) has raised concerns that hosting externally facing applications alongside management tools does not meet internal compliance standards.
The Operations team has raised concerns about Tier-1 virtual machines negatively impacting the performance of vCenter Server.
The Operations lead has stated that management changes have consistently been rejected by application teams.
As a result of the review, which recommendation should the architect make regarding the design of this platform?
- A. Separate Tier-1, Tier-2 and Tier-3 virtual machines onto dedicated clusters
- B. Separate Tier-1, Tier-2 and Tier-3 virtual machines using resource pools and shares
- C. Separate Tier-1, Tier-2 and Tier-3 virtual machines using dedicated distributed virtual switches (DVS)
- D. Separate Tier-2 virtual machines onto a dedicated cluster
Answer: B
NEW QUESTION # 41
Following a recent acquisition, an architect needs to merge IT assets into its current data center. The combined vSphere environment will need to run the newly acquired company's virtual machines.
Network integration work has already been completed and the current environment has capacity to host all virtual machines. The Operations team needs to identify which virtual machines belong to the acquired company and report on their usage.
How should the architect merge the company's assets and virtual machines?
- A. Leave the newly acquired company's assets in its current place
- B. Migrate the acquired company's virtual machines into the existing vSphere environment
- C. Migrate and apply vSphere tags to the acquired company's virtual machines
- D. Lift and shift the acquired assets into the data center
Answer: C
NEW QUESTION # 42
An architect is designing a new vSphere platform for a customer to meet the following requirements:
The platform must be deployed into five physically separate sites.
The sites are spread across multiple regions.
Some sites require more than one vCenter Server.
The platform must provide an administrator with the ability to access virtual infrastructure components across all sites from a single management tool instance.
Which single sign-on (SSO) design recommendation will meet these requirements?
- A. Use an SSO domain per vCenter Server instance
- B. Use an SSO domain across all vCenter Server instances
- C. Use an SSO domain per region
- D. Use an SSO domain per site
Answer: B
Explanation:
Use an SSO domain across all vCenter Server instances "The platform must provide an administrator with the ability to access virtual infrastructure components across all sites from a single management tool instance" Having a single SSO domain will achieve this.
"The platform must provide an administrator with the ability to access virtual infrastructure components across ALL SITES from a SINGLE management tool instance" this is Linked mode.
NEW QUESTION # 43
During a requirements gathering workshop, the customer provides the following requirement (REQ) and constraints (CON):
REQ01: The customer is looking for a way to limit database virtual machine (VM) placement to save on CPU licensing costs.
CON01: There is a single cluster with no budget to scale.
CON02: All virtual machines must run on the consolidated cluster.
Which two design decisions should the architect make to meet the customer requirement? (Choose two.)
- A. The solution must use a vRealize Orchestrator workflow for VM placement
- B. The solution must use VM-VM anti-affinity rules
- C. The solution must use vSphere VM and host DRS groups
- D. The solution must use vSphere DRS in manual mode
- E. The solution must use VM-Host affinity rules
Answer: C,E
Explanation:
https://docs.vmware.com/en/VMware-vSphere/6.7/com.vmware.vsphere.mscs.doc/GUID-1F39CF51-CDA5-40B7-B5AA-8CBA37C65314.html
NEW QUESTION # 44
An architect is considering placement of virtual machines within an existing VMware software-defined data center (SDDC).
During the discovery phase, the following information is documented:
Cluster One
Six ESXi hosts
vSphere HA with host failures cluster tolerates = 1
Proactive HA is enabled and set to automated
Fully Automated vSphere DRS
Transparent Page Sharing (TPS) is enabled
Cluster Two
Eight ESXi hosts
vSphere HA with host failures cluster tolerates = 1
Proactive HA is disabled
Partially Automated vSphere DRS
Transparent Page Sharing (TPS) is disabled
Cluster Three
Three ESXi hosts
vSphere HA with admission control is disabled
Proactive HA is not supported
Transparent Page Sharing (TPS) is disabled
Virtual Machine Resource Profile 1
Memory sharing techniques should not be used
Virtual machines should be automatically restarted in the event of host failure if resources are available Automated initial virtual machine placement Virtual Machine Resource Profile 2 Memory sharing techniques should not be used Virtual machines should be automatically restarted in the event of host failure regardless of available resources Automated initial virtual machine placement Which two recommendations should the architect make for placement of the virtual machines to meet resource profile requirements? (Choose two.)
- A. All virtual machines matching Virtual Machine Resource Profile 1 should be placed on Cluster One.
- B. All virtual machines matching Virtual Machine Resource Profile 2 should be placed on Cluster Two.
- C. All virtual machines matching Virtual Machine Resource Profile 2 should be placed on Cluster One.
- D. All virtual machines matching Virtual Machine Resource Profile 1 should be placed on Cluster Two.
- E. All virtual machines matching Virtual Machine Resource Profile 2 should be placed on Cluster Three.
Answer: D,E
Explanation:
Reference:
https://docs.vmware.com/en/VMware-vSphere/7.0/com.vmware.vsphere.resmgmt.doc/GUID-FEAC3A43-C57E-49A2-8303-B06DBC9054C5.html
NEW QUESTION # 45
An architect is designing a solution for an environment with two types of resource profiles that must be virtualized. The first type consists of Tier 1 virtual machines that are disk I/O intensive, but do NOT require high CPU or memory. The second type consists of Tier 2 virtual machines that require a lower CPU and memory allocation and have minimal disk I/O.
Which design recommendation should the architect make for distributing the resource profiles?
- A. Run both resource profiles on the same cluster with the same host hardware platform.
- B. Run both resource profiles on the same cluster with host hardware that has fast CPU, large amounts of memory, and the fastest storage platform.
- C. Separate the two resource profiles into two clusters. The Tier 2 cluster will have faster CPU and more memory while the Tier 1 cluster will have slower CPU and less memory but more disk space.
- D. Separate the two resource profiles into two clusters. The Tier 1 cluster will have fast storage while the Tier 2 cluster will not.
Answer: D
Explanation:
Checked in the training manual, chapter 10 Infrastructure Manageability: When mention about tiers... always talks about DIFFERENT CLUSTERS. Vmware suggest this in order to calculate spare hosts, cpu contention, disk performance, etc. In this case B and D should be disregarded, you should not mix Tier 1 and 2 in the same cluster.
NEW QUESTION # 46
Which two of the listed requirements would be classified as performance non-functional requirements? (Choose two.)
- A. The vSphere platform must be able to provide a recovery time objective of 30 minutes
- B. The vSphere platform must be able to provide a service-level agreement (SLA) of 99,9%
- C. The vSphere platform must be able to provide N+1 redundancy
- D. The vSphere platform must be able to provide a maximum read latency of 15 ms
- E. The vSphere platform must be able to provide a minimum throughput of 400 MB/s
Answer: A,D
NEW QUESTION # 47
An architect is designing a new vSphere environment to meet the following requirements:
The environment must support 5,000 virtual machines.
The environment will be built initially using 350 hosts.
Which vCenter Server appliance deployment size should the architect specify for the design?
- A. Large
- B. Medium
- C. Tiny
- D. Small
Answer: A
Explanation:
https://docs.vmware.com/en/VMware-vSphere/7.0/com.vmware.vcenter.install.doc/GUID-077C7523-E0EA-4922-8D48-C026916323C4.html#:~:text=For%20tiny%20deployment%20size%2C%20deploys%20the%20appliance%20with%203245%20GB,with%203525%20GB%20of%20storage.
NEW QUESTION # 48
The Chief Operating Officer (COO) at an organization raises concerns that their virtual infrastructure environment is vulnerable. Recently, a security-related issue with a virtual machine caused all management services to become unavailable. No budget is available in the short term for additional platform investment. An architect is asked to review the current environment and make recommendations to mitigate concerns.
A virtualization administrator has provided the following details:
There is a single four node cluster of ESXi servers
There are two, Layer 2, physical network switches connecting resources
The data center network is presented as a single /16 subnet
Given the information provided, which functional requirement should the architect include in the design to mitigate the COOs concerns?
- A. The virtual infrastructure environment must connect application virtual machines and management services to separate VLANs
- B. The virtual infrastructure environment must connect application virtual machines and management services to new physical network switches
- C. The virtual infrastructure environment must connect application virtual machines and management services to separate distributed virtual switches (DVS)
- D. The virtual infrastructure environment must connect management services to a vSphere standard switch (VSS)
Answer: A
Explanation:
"VLANs let you segment a network into multiple logical broadcast domains at Layer 2 of the network protocol stack." https://docs.vmware.com/en/VMware-vSphere/7.0/com.vmware.vsphere.networking.doc/GUID-C42AFA4A-1BDA-4ECC-B2D1-6E538771B2C3.html
NEW QUESTION # 49
An architect is designing a new VMware solution for a customer that has a number of different resource profiles.
The following are the business requirements for the design:
The solution must support virtual machines with the following storage profiles:
- Write-intensive
- Backup
- Write-Once-Read-Many (WORM) archive
The solution must support migration of virtual machine disks between storage profiles.
The WORM archive data must be located at an isolated secure site.
The backup storage array must only be connected to a backup media server.
All data should be recoverable from backup.
Which design decision should the architect make to meet the business requirements?
- A. The solution will leverage a single storage array for the WORM archive and write-intensive storage profiles
- B. The solution will leverage a different array for each storage profile
- C. The solution will leverage the same array for the backup and write-intensive storage profiles
- D. The solution will leverage a single storage array for all storage profiles
Answer: B
NEW QUESTION # 50
Which design decision must be included in a design to allow for the deployment of a minimum supported configuration of vCenter High Availability (HA)?
- A. The deployed vCenter Server will be Tiny
- B. A new subnet will be provisioned for vCenter HA services
- C. The vCenter HA network will support a latency of less than 50 ms
- D. A vSphere cluster will consist of more than three nodes
Answer: B
Explanation:
https://docs.vmware.com/en/VMware-vSphere/7.0/com.vmware.vsphere.avail.doc/GUID-8FD87389-8CC9-4298-8B08-A1526FB44524.html
NEW QUESTION # 51
Refer to the exhibit.
During a requirements gathering workshop, a customer shares the following diagram regarding their availability service-level agreements (SLAs):
The customer states that there is no application level availability for legacy applications.
Which recommendation could the architect make to meet the customer's high availability requirements for the legacy applications virtual machines?
- A. Enable Fault Tolerance
- B. Enable vSphere HA and add a VM Override with VM Restart Priority set to Lowest
- C. Achieve application availability with snapshots
- D. Enable vSphere HA and add a VM Override with VM Restart Priority set to Disabled
Answer: D
Explanation:
Explanation/Reference:
NEW QUESTION # 52
An architect is tasked with designing a new VMware software-defined data center (SDDC) solution for an online retail customer who has a primary and secondary data center as well as 10 distribution hubs.
The customer has provided the following business requirements to help inform the design:
The solution must support the running of up to 1,000 concurrent virtual machines across the primary and secondary data center.
The solution must support the running of up to 20 concurrent virtual machines in each distribution hub.
The solution must support the separation of management and lines-of-business application virtual machines.
All management components (including directory services, backup, automation, operations and logging) must be deployed to the primary data center.
All virtual infrastructure components must have redundancy of N+1.
All sites are connected to each other using a wide area network that has multiple diversely routed links.
The solution should support a monthly uptime target of 99.9%.
The recovery time objective (RTO) for the solution must be four hours.
The recovery point objective (RPO) for the solution must be 24 hours.
Given the information from the customer, which assumption should the architect include in the design?
- A. The wide area network has sufficient bandwidth to support centralized management.
- B. All business application virtual machines can be deployed into a single cluster within the primary data center.
- C. Each distribution hub should be configured with a backup device.
- D. Each cluster will have a minimum of four hosts.
Answer: A
NEW QUESTION # 53
A new real-time financial service application is being developed by the engineering team at a financial firm and will be released as a public Software-as-a-Service (SaaS) offering. The solutions architect has designed and deployed a new vSphere environment and the supporting network infrastructure for hosting all public services. ESXi hosts are configured to use Precision Time Proalhazi@1tocol (PTP) and a local stratum-1 network time server.
Application provisioning and scaling will be managed by VMware vRealize Automation and can be run on Microsoft Windows or multiple distributions of Linux.
Which three recommendations should the architect include in the design to ensure that the service maintain timekeeping within an accuracy of one second? (Choose three.)
- A. Use Microsoft Windows Server as the guest operating system.
- B. Add a virtual watchdog timer (VWDT) device to each virtual machine running the application.
- C. Add a precision clock virtual device to each virtual machine running the application.
- D. Set the virtual hardware device to use Host System Time (NTP) for each virtual machine running the application.
- E. Configure the chrony time-sync agent on each virtual machine guest operating system.
- F. Use a Linux distribution as the guest operating system.
Answer: C,E,F
Explanation:
https://blogs.vmware.com/apps/2021/04/lets-be-precise-enabling-and-configuring-precision-time-protocol-in-vsphere.html
https://core.vmware.com/blog/introducing-ptpvmw-new-linux-driver-achieve-high-time-synchronization-accuracy
https://blogs.vmware.com/apps/2020/09/ensuring-accurate-time-keeping-in-virtualized-active-directory-infrastructure.html
NEW QUESTION # 54
An architect is tasked with designing a greenfield VMware software-defined data center (SDDC) solution that will be used to deliver a private cloud service for a customer.
During the initial meeting with the service owner and business sponsor, the customer has provided the following information to help inform the design:
The solution must initially support the concurrent running of 300 production and 600 development virtual machines.
The production environment should be delivered across two geographically dispersed data centers. The development environment must be vSphere-based but does not have to be deployed on-premises.
The two data centers are connected to each other through multiple diversely routed, high bandwidth and low latency links.
The customer's server hardware standard document states that all virtual infrastructure hosts must be based on blade architecture only.
The service owner has said that is important to ensure that neither the availability target of 99.5% nor the resource capacity is affected when the operations team completes maintenance activities, such as the monthly software patching and ad-hoc hardware break/fix.
All virtual machine backups must be completed using the existing backup service. The recovery time objective (RTO) for the service is four hours.
The recovery point objective (RPO) of the service is 24 hours.
Given the information from the customer, which two would be classified as assumptions within the design? (Choose two.)
- A. The customer will update their hardware standard to support rack mount servers
- B. All virtual machines will be deployed with the same resource profile for production and development
- C. The backup service has sufficient capacity for the new requirements
- D. The backup service will store data in a secure facility
- E. The clusters will have a minimum redundancy of N+1
Answer: C,E
Explanation:
B) The backup service has sufficient capacity for the new requirements
"All virtual machine backups must be completed using the existing backup service." The existing backup service may not have capacity or compatabiltiy for the new SDDC E) The clusters will have a minimum redundancy of N+1
"The service owner has said that is important to ensure that neither the availability target of 99.5% nor the resource capacity is affected when the operations team completes maintenance activities" We assume N+1 is sufficient. They may require a higher level of redundancy.
NEW QUESTION # 55
An architect is designing a VMware solution for a customer based on the following information:
The solution must use investments in existing storage array that supports both block and file storage.
The solution must support the ability to migrate workloads between hosts within a cluster.
The solution must support resource management priorities.
The solution must support the ability to connect virtual machines directly to LUNs.
The solution should use existing IPv4 based network infrastructure.
There is no budget for additional physical hardware.
Which two design decisions could the architect make to meet these requirements? (Choose two.)
- A. The ESXi hosts will leverage NFS 3
- B. The ESXi hosts will leverage NFS 4.1
- C. The ESXi hosts will leverage Fibre Channel (FC)
- D. The ESXi hosts will leverage Fibre Channel over Ethernet (FCoE)
- E. The ESXi hosts will leverage iSCSI
Answer: D,E
Explanation:
"The solution must support the ability to connect virtual machines directly to LUNs." - this rules out non-block storage. "The solution should use existing IPv4 based network infrastructure." - this rules out FC.
NEW QUESTION # 56
During a requirements gathering workshop, the customer provides the following requirement:
A new vSphere platform must be designed securely and all interfaces must be protected against potential snooping.
How should this non-functional security requirement be documented?
- A. Communications must be through Private VLANs (PVLAN).
- B. Unauthorized access to interfaces must be reported within 15 minutes.
- C. Interfaces must be audited.
- D. Encrypted channels must be used for all communications.
Answer: C
NEW QUESTION # 57
There is a request for approved virtual machine applications through a new vSphere platform's integrated automation portal. The platform was built following all provided company security guidelines and has been assessed against Sarbanes-Oxley Act of 2002 (SOX) regulations.
The platform has the following characteristics:
vRealize Operations is being used to monitor all clusters.
There is a dedicated ESXi cluster, supporting all management services.
All network traffic is via distributed virtual switches (DVS).
There is a dedicated ESXi cluster for all line-of-business applications.
Network traffic is serviced by NSX-T.
There is a dedicated ESXi cluster for virtual desktop infrastructure (VDI).
Network traffic is serviced by NSX-T.
The application owner is requesting approval to install a new service that must be protected as per the Payment Card Industry (PCI) Data Security Standard.
Which additional non-functional requirement should the architect include in the design to support the new service?
- A. The vSphere hosting platform and all PCI application virtual machines must be assessed for SOX compliance.
- B. The vSphere hosting platform and all PCI application virtual machine network traffic must be routed via NSX-T.
- C. The vSphere hosting platform and all PCI application virtual machines must be monitored using the vRealize Operations Compliance Pack for Payment Card Industry.
- D. The vSphere hosting platform and all PCI application virtual machines must be assessed against Payment Card Industry (PCI) Data Security Standard compliance.
Answer: D
NEW QUESTION # 58
......
Ultimate 3V0-21.21 Guide to Prepare Free Latest VMware Practice Tests Dumps: https://www.fast2test.com/3V0-21.21-premium-file.html
Get Top-Rated VMware 3V0-21.21 Exam Dumps Now: https://drive.google.com/open?id=1HW-Bn9F70FXRXqTeTDosgGwVpTMPEFcZ