100% Real & Accurate HPE0-V14 Questions and Answers with Free and Fast Updates
Get Unlimited Access to HPE0-V14 Certification Exam Cert Guide
NEW QUESTION # 12
Match each adapter to its characteristic.
Answer:
Explanation:
NEW QUESTION # 13
A customer plans to back up a file server that holds 2 TB of data. The customer wants to upgrade their network infrastructure to support backup and to implement a datacenter network solution.
Which solutions would HPE recommend to meet the customer needs? (Choose two.)
- A. StoreVirtual VSA
- B. StoreOnce 3100
- C. StoreEasy 1450
- D. Aruba 2900
- E. FlexFabric 5900
Answer: B,E
NEW QUESTION # 14
A local state college is implementing a new VDI cluster to support computer and testing labs. They have the following requirements:
* Three VMware ESXi Hosts, each with one AMD processor, 1 TB of RAM, 16 Gbps FC Dual Port HBA.
* HPE Nimble AF20 with 17 TB usable capacity.
* Integration into an existing HPE FlexFabric 5710 and HPE SN3000B Fibre Channel SAN switches.
* The solution must fit in 7U of rack space. If the customer needs more capacity in the future, they will use scale-out growth.
Which server model should you recommend to this client?
- A. HPE DL325
- B. HPE DL360
- C. HPE DL385
- D. HPE DL380
Answer: C
NEW QUESTION # 15
A customer is considering an HPE ProLiant DL380 Gen10 server for their data center. The customer runs a large Oracle database. They need to increase performance and reduce their licensing costs.
Which feature of HPE Gen10 servers offers these benefits?
- A. workload profile matching
- B. jitter smoothing
- C. core boosting
- D. agentless management
Answer: C
NEW QUESTION # 16
Read the question, and then refer to the exhibit.
<Switch-A>display int Ten-GigabitEthernet 1/0/1 Ten-GigabitEthernet1/0/1 Current state: UP Line protocol state: UP IP packet frame type: Ethernet II, hardware address: d894-03fb-793d Description: Ten-GigabitEthernet1/0/1 Interface Bandwidth: 10000000 kbps Loopback is not set Media type is stack wire, port hardware type is STACK SFP_PLUS 10Gbps-speed mode, full-duplex mode Link speed type is autonegotiation, link duplex type is autonegotiation Flow-control is not enabled Maximum frame length: 10000 Allow jumbo frames to pass Broadcast max-ratio: 100% Multicast max-ratio: 100% Unicast max-ratio: 100% PVID: 1 MDI type: Automdix Port link-type: Trunk VLAN Passing: 10 VLAN permitted: 10 Trunk port encapsulation: IEEE 802.1q Port priority: 0 <SNIP> An administrator connected a hypervisor to interface Ten-Gigabit Ethernet1/0/1 in a switch. The administrator created virtual machines in VLAN 10 and 20 on the hypervisor. These VLANs are configured to be tagged on the hypervisor.
The administrator found that all the virtual machines within VLAN 20 can communicate with each other, but not to any resource on VLAN 20 outside the hypervisor.
What must you do to resolve this issue?
- A. Configure the PVID of the interface to be VLAN 20.
- B. Configure the interface as an access port.
- C. Permit VLAN 20 on the interface.
- D. Configure the interface as an IRF port.
Answer: D
NEW QUESTION # 17
Which tool provides a report on the current usage levels and life span of some installed read-intensive flash drives?
- A. Integrated Management Log
- B. Central Management Console
- C. Smart Storage Administrator
- D. Intelligent Provisioning
Answer: C
NEW QUESTION # 18
Match each ProLiant solution to its ideal use case
Answer:
Explanation:
NEW QUESTION # 19
A customer needs to create a large RAID set for archive storage on large-capacity drives.
Which RAID level is recommended for this customer?
- A. RAID 0
- B. RAID 1+0
- C. RAID 5+0
- D. RAID 6
Answer: D
NEW QUESTION # 20
Refer to the exhibit.
You are configuring a pair of HPE 5945 switches into an IRF stack You have cabled the switches as depicted in the exhibit Into which IRF Ports should you place each switch interface?
A)
B)
C)
D)
- A. Option D
- B. Option C
- C. Option B
- D. Option A
Answer: D
NEW QUESTION # 21
A customer is facing high and unpredictable latency on an HPE ProLiant DL380 Gen10 server equipped with P408i-a controller Which tool can display an Array Diagnostic Report?
- A. UEFl Embedded Diagnostics
- B. Smart Storage Administrator
- C. HPE OneView
- D. HPE InfoSight
Answer: B
NEW QUESTION # 22
Which HPE remote management tool offers simplified warranty and contract case management?
- A. HPE iLO Advanced
- B. HPE InfoSight
- C. HPE Smart Update Manager
- D. HPE Insight Online
Answer: D
Explanation:
Explanation/Reference: https://h20195.www2.hpe.com/v2/getpdf.aspx/c04123234.pdf
NEW QUESTION # 23
When installing servers in a rack, a customer has left gaps between the servers.
What should you tell this customer regarding the space between servers? (Select two.)
- A. It provides easy access for servicing components.
- B. It does not provide correct rack airflow.
- C. It allows for side-to-side component cooling.
- D. It allows for easier cable management.
- E. It should be filled with blanking panels.
Answer: B,E
NEW QUESTION # 24
A customer needs a storage solution to host a new virtualization platform that will host a database application. The customer is considering an HPE Nimble array.
What features would lead you to propose an HPE Nimble array over an HPE 3PAR array? (Select two.)
- A. 10GD Base-T connectivity
- B. supports Object S3 Storage
- C. future proof design
- D. lower operating costs
- E. global replication
Answer: C,D
NEW QUESTION # 25
Where would a customer go to run the SSD wear Gauge report on an HPE ProLiant server?
- A. UEFI System Bios
- B. insight Diagnostics
- C. OneView Standard
- D. Smart Storage Administrator
Answer: D
NEW QUESTION # 26
You are troubleshooting a HPE ProLiant Gen 9 server and need to find a consolidated view of all the system health and configuration information in a single web interface.
Which HPE tool should you use?
- A. InfoSight
- B. UEFI
- C. System Management Homepage
- D. Central Management Console
Answer: C
NEW QUESTION # 27
A customer Has a data center with third-party routers and firewalls You are designing a new data center network switch architecture consisting of FlexFabric switching for the data network and ArubaOS-Switch switching for the out-of-band management network.
The customer needs a network management platform with the capabilities to manage and monitor the entire environment Which management platform meets the customer requirements?
- A. Aruba Airwave
- B. HPE OneView
- C. HPE IMC
- D. Aruba Central
Answer: C
NEW QUESTION # 28
You are designing a system for a customer that has a contract with a government agency. The contract requires the highest level of security algorithms possible.
Which HPE ProLiant Gen10 feature set will address this customer's needs?
- A. production mode
- B. CNSA mode
- C. FIPS 140-2 mode
- D. high security mode
Answer: B
NEW QUESTION # 29
A customer has a single HPE ProLiant Gen 10 server.
Which embedded management tool should they use to monitor the server?
- A. NPE Intelligent Provisioning
- B. HPE OneView Standard
- C. HPE Smart Update Manager
- D. HPE iLO5
Answer: C
Explanation:
Explanation/Reference: https://dustinweb.azureedge.net/media/483889/proliant-dl380-gen10-smb.pdf
NEW QUESTION # 30
Refer to the exhibit.
An administrator connected a hypervisor to interface Ten-GigabitEthernet1/0/1 in a switch. The administrator created virtual machines in VLAN 10 and 20 on the hypervisor. VLAN 10 is configured to be tagged, and VLAN
20 is configured to be untagged on the hypervisor.
The administrator found that all the virtual machines in VLAN 20 can communicate with each other, but not with any virtual machines on VLAN 20 external to the hypervisor.
Given the output in the exhibit, what should you do to resolve the issue?
- A. Configure the PVID of the interface to be VLAN 20.
- B. Permit VLAN 1 on the interface.
- C. Configure the interface as an access port.
- D. Configure the interface as an IRF port.
Answer: D
NEW QUESTION # 31
A customer is considering an upgrade of their networking infrastructure with HPE FlexFabric 5940 series switch.
Match the fan tray option with the airflow direction.
Answer:
Explanation:
NEW QUESTION # 32
A customer considers a new HPE ProLiant DL380 Gen10 as a hardware platform for their application and requires maximum physical security.
For each security-related server components, identify whether it needs to be ordered separately, or whether it is included as part of the server solution.
Answer:
Explanation:
Explanation
NEW QUESTION # 33
Refer to the exhibit.
A customer purchased a server/storage environment shown in the exhibit with 1 Gb networking connectivity.
The customer is now experiencing performance issues.
Identify the correct components to upgade the network connections and improve performance on the left. Then drag those components to the answer area on the right. (Choose three.)
Answer:
Explanation:
Explanation
NEW QUESTION # 34
A customer has requested that you provide them with an architecture and bill-of-materials for a stack of top-of- rack switches. The customer has 34 HPE DL360 servers in the rack, each with four 1GBASE-T Ethernet ports which need to be connected to the network.
The customer is upgrading 50% of the 1GBASE-T Ethernet ports on the servers to 10GBASE-T Ethernet ports and needs the switching to support the upgraded servers. They are opposed to a chassis switch, and want to keep the number of managed devices on the network to a minimum.
Which architecture meets the customer requirements?
- A. One IRF stack of four HPE 5710 48-port 1/10GBASE-T switches
- B. Two IRF stacks of two HPE 5710 48-port 1/10GBASE-T switches
- C. One VSX stack of four Aruba 8320 48-port 1/10GBASE-T switches
- D. Two VSX stacks of two Aruba 8320 48-port 1/10GBASE-T switches
Answer: D
NEW QUESTION # 35
You plan to perform maintenance on several systems in a rack. You need to ensure that the rack does not tip when you are working on the equipment.
What should you use?
- A. lockable casters
- B. stabilizer kit
- C. adjustable depth frame
- D. leveling feet
Answer: B
NEW QUESTION # 36
Refer to the exhibit.
You are validating a Nimble HF40 configuration created in OCA, and you receive an error when you run a CLIC check.
Which Nimble component needs to be added to the configuration to complete the solution?
- A. HPE Nimble Storage C19 to C20 250V 16 Amp 1.8m PDU Base Array FIO Power Cord
- B. HPE Nimble Storage HF40/60 Adaptive ES3 21TB HDD 1.44 TB Cache CTO Expansion Shelf
- C. HPE Nimble Storage HF40 Adaptive Array R2 2.88 TB FIO Cache Bundle
- D. HPE Nimble Storage Embedded 10GBASE-T 2-port FIO Adapter
Answer: B
NEW QUESTION # 37
......
Reliable Study Materials for HPE0-V14 Exam Success For Sure: https://www.fast2test.com/HPE0-V14-premium-file.html