Get Latest [Jul-2021] Conduct effective penetration tests using Fast2test E20-393
Penetration testers simulate E20-393 exam PDF
NEW QUESTION 62
Which Dell EMC Unity XT service task would most quickly resolve connection problems between the storage system and Unisphere?
- A. Reimage the Storage Processors
- B. Reinitialize the Storage System
- C. restart the Management Software
- D. Reboot the Storage Processors
Answer: D
Explanation:
Explanation/Reference: https://www.emc.com/collateral/TechnicalDocument/docu69358.pdf
NEW QUESTION 63
What is the sequence of steps that must be executed to implement IP Multi-tenancy in a Unity system?
- A. Add tenants to the Unity systemCreate a NAS server for each tenantCreate file systems and shares for each tenant
- B. Associate tenants with existing NAS serversCreate file systems and shares for each tenantConfigure host access for the tenant's shares
- C. Create file systems and shares for each tenantConfigure host access for the tenant's sharesAdd tenants to the Unity System
- D. Create a NAS server for each tenantCreate file systems and shares for each tenantAdd tenants and associate to the NAS servers
Answer: A
Explanation:
Explanation
References:
https://www.dellemc.com/en-za/documentation/unity-family/unity-p-configure-smb-file-sharing/08-unity-smb-c-
NEW QUESTION 64
What describes multiple LUN snapshots?
- A. Captures multiple point-in-time data states.
Snapshot data state is marked "modified" from its source when attached.
Snapshot tree supports multiple simultaneous attaches. - B. Captures multiple point-in-time data states.
Snapshot data state is marked "unmodified" from its source when attached.
Snapshot tree supports only one attach at a time. - C. Captures multiple point-in-time data states.
Snapshot data state is marked "unmodified" from its source when attached.
Snapshot tree supports multiple simultaneous attaches. - D. Captures multiple point-in-time data states.
Snapshot data state is marked "modified" from its source when attached.
Snapshot tree supports only one attach at a time.
Answer: D
Explanation:
Explanation/Reference:
Only a single snapshot per LUN can be attached at any given time, and must be detached prior to
attaching another snapshot of the same LUN.
NEW QUESTION 65
Where do the D@RE encryption/decryption functions occur in the Unity storage system?
- A. SAS I/O Module
- B. Self-encrypting drives
- C. Host I/O Modules
- D. Storage Processor Cache
Answer: A
Explanation:
Explanation
Upon installation and activation of the feature, the following keys are generated by
RSA BSAFE and persisted to the Lockbox:
A new KEK is generated each time the array boots. The KEK is wrapped with the KWK and passed to the
SAS controller during the system boot process. Using the persisted KWK, the SAS controller can decrypt the
KEK.
NEW QUESTION 66
How long before a license expires will UnityVSA send the first alert warning?
- A. 15 days
- B. 1 month
- C. 7 days
- D. 3 days
Answer: B
Explanation:
Explanation/Reference:
As a reminder, UnityVSA displays several alerts in Unisphere prior to the license expiration date. The table below shows when alerts are generated leading up to the expiration date.
NEW QUESTION 67
Which Dell EMC Unity XT models support Dynamic Pools?
- A. 380F, 480F, 680F, and 880F
- B. 380F, 480, 680F, and 880
- C. 380, 480, 680, and 880
- D. Dell EMC UnityVSA storage only
Answer: A
NEW QUESTION 68
The soft limit quota for a file system has just been exceeded. What would you expect to occur concerning data
access?
- A. If the soft limit remains exceeded and the grace period expires, no new data may be added to the
particular file system or directory. - B. Once the soft limit is reached, the grace period counts down until the hard limit is reached. New data can
be written as long as the hard limit has not been reached. - C. Once the soft limit is reached, no new data can be added to the file system or directory.
- D. If the soft limit remains exceeded and the grace period expires, new data may be added to the particular
directory. The system will alert the grace period expired.
Answer: B
NEW QUESTION 69
What are some of the configurations available for creating a LUN in Unisphere?
- A. Number of LUNs to create
Size of the LUN
Pool to create the LUN from
RAID type for the LUN - B. Number of LUNs to create
Host I/O limits
Size of the LUN
Enable Thick LUN - C. Size of the LUN
RAID type for the LUN
Host I/O limits
Enable Thick LUN - D. Number of LUNs to create
Name of the LUN
Size of the LUN
Pool to create the LUN from
Answer: C
NEW QUESTION 70
What types of file retention are available with the Dell EMC Unity XT family arrays?
- A. Community and Professional editions
- B. Integrated and Centralized
- C. Professional and Enterprise editions
- D. Enterprise and Compliance
Answer: D
Explanation:
Explanation/Reference: https://www.dellemc.com/th-th/collaterals/unauth/data-sheets/products/storage/ h17713_dell_emc_unity_xt_series_ss.pdf
NEW QUESTION 71
Where do the D@RE encryption/decryption functions occur in the Unity storage system?
- A. SAS I/O Module
- B. Self-encrypting drives
- C. Host I/O Modules
- D. Storage Processor Cache
Answer: A
Explanation:
Upon installation and activation of the feature, the following keys are generated by RSA BSAFE and persisted to the Lockbox:
A new KEK is generated each time the array boots. The KEK is wrapped with the KWK and passed to the SAS controller during the system boot process. Using the persisted KWK, the SAS controller can decrypt the KEK.
NEW QUESTION 72
A Thin Clone has just been created. What operation can be performed on it?
- A. Increase its size.
- B. Change SP ownership
- C. Change Data Reduction setting
- D. Change FAST VP Policy
Answer: A
Explanation:
Explanation/Reference:
Reference: https://www.dellemc.com/resources/en-us/asset/white-papers/products/storage/h15089-dell-
emc-unity-snapshots-and-thin-clones.pdf (27)
NEW QUESTION 73
At which stage in the Unity power up sequence would the Storage Processor enter Service mode upon detecting an error?
- A. BIOS
- B. After the CMI is started
- C. POST
- D. Bootflash
Answer: C
Explanation:
Note: Boot counters are a troubleshooting mechanism that is designed into the Unity architecture to help pinpoint the specific cause of software or hardware events during the boot sequence. If the Unity system detects a problem with software or hardware components, its corresponding Boot Counter is incremented. If a counter reaches a predefined threshold, the SP boots into Service Mode during its next boot cycle.
References: https://www.emc.com/collateral/TechnicalDocument/docu69328.pdf (page 12)
NEW QUESTION 74
Which feature provides the ability to provision block and file storage for Microsoft Windows or Microsoft
SharePoint sites?
- A. EMS Storage Integrator for Windows
- B. vStorage APIs for Array Integration
- C. EMC Virtual Storage Integrator
- D. Array Offloaded Data Transfer
Answer: A
NEW QUESTION 75
A company has a Unity 300 system with 200 SAS drives. They need to increase the number of SAS drives
by 300. Which in-place upgrade is required?
- A. Unity 400
- B. Unity 600F
- C. Unity 500
- D. Unity 400F
Answer: C
Explanation:
Explanation/Reference:
References: https://www.emc.com/collateral/data-sheet/h14958-unity-hybrid-family-ss.pdf?
isKoreaPage=false&domainUrlForCanonical=https%3A%2F%2Fwww.emc.com
NEW QUESTION 76
A user is having difficulty troubleshooting a Unity storage system and the service provider has been contacted for assistance. The service provider needs to run some service commands on the Storage Processors to troubleshoot the issue further.
Which step must be taken to allow the service provider remote access to the storage system?
- A. Specify the SMTP configuration
- B. Specify the Remote Logging configuration
- C. Set the Unisphere preferences to "Optimize" for remote access
- D. Enable SSH on the storage system
Answer: B
Explanation:
Explanation/Reference:
The Service Tasks tab provides tools to service the storage system, including repair and troubleshooting. You can use this page to collect system and configuration information for assisting your service provider with a service request. The service password is required to access the various service task operations.
The Technical Advisories tab displays up-to-date information about advisories specific to the system by referencing knowledge base articles. The Logs tab displays an audit log for system events. It also allows users to configure a remote host to which to send log information and lets users export logs into a CSV file for additional reporting purposes.
NEW QUESTION 77
A storage administrator is required to test a new version of an application loaded on a secondary host. The
administrator must use existing data contained on a LUN provisioned from a Dell EMC Unity to a primary
host.
Which solution will meet the requirement and provide space efficiency?
- A. Create a Synchronous Replication session for the LUN
Configure access to the replica LUN for the secondary host
Attach the secondary host - B. Create a Snapshot of the LUN
Configure secondary host connectivity to Dell EMC Unity
Attach the Snapshot to the secondary host - C. Create an Asynchronous Replication session for the LUN
Configure access to the replica LUN for the secondary host
Attach the secondary host - D. Create a Snapshot of the LUN
Configure LUN access for the secondary host
Attach the Snapshot to the secondary host
Answer: A
NEW QUESTION 78
......
Tested Material Used To E20-393 Test Engine: https://www.fast2test.com/E20-393-premium-file.html